Sports Technology Labs SARMs: Catalog, COA Results and What to Check
Guides8 min readOctober 30, 2026

Sports Technology Labs SARMs: Catalog, COA Results and What to Check

What Sports Technology Labs sells on the SARMs side of its catalog, how the liquid and powder formats are listed, what its public COA page shows for each SARM, and the regulatory caveats researchers should know.

Sports Technology Labs sells research SARMs in two main formats: liquid solutions in USP-grade PEG-400, sold in 30 mL bottles at concentrations between 10 and 50 mg/mL, and 2 gram powders. It also sells bundles and wholesale quantities. Every SARM listing is labeled for research use only, and the vendor publishes a third-party HPLC purity result for each SARM on a public COA page. Most of those results are above 99%, but two sit below the vendor's own 98% minimum, and the page does not name the testing lab. This guide covers what the SARMs catalog contains, what the COA page shows, and what to check before ordering.

SARMs are the category Sports Technology Labs was first known for, before it expanded into research peptides. For the company overview, peptide pricing and shipping, see our full Sports Technology Labs review. For every published peptide result, see our guide to Sports Technology Labs peptides and their COA results.

Where the SARMs Sit in the Catalog

The vendor's homepage describes the company as "a US-based supplier of research compounds for laboratories, research institutions, and qualified businesses," with a mailing address in Shelton, Connecticut. The SARMs side of the store is split into four areas:

  • Liquid SARMs on the buy SARMs page
  • SARMs powders, listed as 2 gram products
  • Bundles, which group two or three compounds at a combined price
  • Wholesale, for larger research quantities

The homepage states that SARMs are "available as powders or as solutions in USP-grade PEG-400." PEG-400 is a common laboratory solvent. Naming the carrier is useful because it tells a lab what else is in the bottle besides the compound itself, which matters when planning an experiment and when interpreting any analysis.

Liquid SARMs: Compounds and Concentrations

At the time of writing (October 2026), the liquid SARMs page lists these compounds and concentrations:

  • MK-2866 (Ostarine): 25 mg/mL, 30 mL
  • GW-501516 (Cardarine): 20 mg/mL, 30 mL
  • S4 (Andarine): 50 mg/mL, 30 mL
  • LGD-4033 (Ligandrol): 10 mg/mL
  • RAD-140 (Testolone): 15 mg/mL
  • RAD-150 (TLB-150): 10 mg/mL
  • SR-9009 (Stenabolic): 20 mg/mL
  • S23: 20 mg/mL
  • YK-11: 10 mg/mL
  • MK-677 (Ibutamoren): 25 mg/mL
  • MK-777: 20 mg/mL
  • RU-58841: 50 mg/mL, listed as atomized

Where the listing text does not state a volume, the product images show 30 mL bottles. Strictly speaking, GW-501516, SR-9009, MK-677 and RU-58841 are not SARMs in the pharmacological sense, but the vendor sells them in the same section and the market groups them together. MK-677 also appears on the peptide side of our review because it is studied as a growth hormone secretagogue; see the GH secretagogues category for background on that research area.

The homepage shows sample prices such as $57.99 for liquid MK-2866 (25 mg/mL, 30 mL), $62.99 for liquid GW-501516 (20 mg/mL, 30 mL) and $119.99 for 2 grams of SR-9009 powder. Prices change, so read these as a snapshot and check the product page on the day you order.

Powders and Bundles

The powders are sold in 2 gram quantities, with SR-9009, RAD-150, LGD-4033 and RAD-140 among the listed products. Powder suits labs that want to prepare their own solutions in a solvent and concentration of their choosing, rather than working with a fixed PEG-400 solution. Bundles combine compounds at a lower price than buying each item alone.

For larger research orders across several vendors, our guide to bulk ordering and volume discounts explains how tiered pricing usually works and what to confirm before committing to a large order.

What the Public COA Page Shows for SARMs

Sports Technology Labs publishes its results on a public COA page split into a SARMs section and a peptides section. The page states: "we test every batch of our SARMs for sale for a minimum of 98% purity," and "Every batch is tested by an independent third-party laboratory before release."

At the time of writing, the SARMs section lists these results:

  • GW-501516 (Cardarine): 99.57%, dated 07/06/25
  • LGD-4033 (Ligandrol): 97.29%, dated 03/16/26
  • MK-677 (Ibutamoren): 99.87%, dated 05/18/2026
  • MK-777: 99.12%, dated 02/10/26
  • MK-2866 (Ostarine): 98.04%, dated 07/08/25
  • RAD-140 (Testolone): 97.4%, dated 10/17/25
  • RAD-150 (TLB-150): 99.8%, dated 07/11/23
  • RU-58841: 99.25%, dated 08/19/25
  • S23: 99.8%, dated 10/17/25
  • S4 (Andarine): 99.74%, dated 06/11/2026
  • SR-9009 (Stenabolic): 99.68%, dated 09/2025
  • YK-11: 98.76%, dated 09/03/25

What stands out

  • Two results are below the stated minimum. LGD-4033 at 97.29% and RAD-140 at 97.4% are both under the 98% figure the page itself promises. That does not make the material unusable for every purpose, but it is a gap between the claim and the published data, and a researcher who needs at least 98% should ask about the current batch before ordering.
  • One certificate per product. The page shows a single current result for each SARM, not an archive of every batch. A result from one lot says nothing certain about the lot that ships to you.
  • Dates vary widely. The RAD-150 result is dated July 2023, while others are from 2026. An older result may not reflect current stock.
  • The lab is not named on the page. The page encourages buyers "to contact the testing lab directly to verify any result," but the page text does not say which lab that is. A public vendor directory listing states that the COAs are produced by MZ Biolabs. If the lab name matters for your records, confirm it on the certificate image or with the vendor.
  • HPLC is the only method referenced. HPLC gives a purity figure. It does not confirm identity the way mass spectrometry does, and it does not measure the PEG-400 carrier or the actual concentration of a liquid product.

That last point matters more for liquids than for powders. A purity result on the raw compound tells you the compound was clean before it was dissolved. It does not tell you whether a bottle labeled 25 mg/mL holds 25 mg/mL. If concentration matters to your work, an independent assay of the solution is the only way to know. Our guide to independent peptide analysis labs explains how buyer-submitted analysis works, and the same approach applies to SARMs.

How to Read a Sports Technology Labs SARM Certificate

Whichever compound you are looking at, the same checks apply:

  • Match the batch. Compare the batch or lot number on the certificate image with the label on the bottle you receive. If the COA page result is for a different lot, ask the vendor for the certificate that matches yours.
  • Check the date. Prefer a result from within the last year, and ask whether a newer result exists for older entries.
  • Look at the chromatogram. A good certificate shows the trace, not only a percentage. A single dominant peak with small, well separated minor peaks is what a clean result looks like.
  • Identify the lab. Find the lab name and report number on the certificate itself, then contact the lab if you want to confirm the document is genuine.
  • Compare against the stated minimum. The vendor's own standard is 98% for SARMs. Anything below that is worth a question.

For a deeper walkthrough of chromatograms and red flags, see how to verify peptide purity. The methods carry over to small molecules like SARMs.

Regulatory Status: What Researchers Should Know

Sports Technology Labs states that "All of the products sold on this site are for research purposes only and are not for human consumption," that "None are approved by the FDA for any use," and that the products are not dietary supplements. That framing matches the regulatory picture.

  • FDA: No SARM has an approved drug application in the United States. In December 2025 the FDA sent warning letters to several SARM sellers. The letter to Titan SARMS calls that company's products "unapproved new drugs under section 505(a)" and states that "Life-threatening reactions, including liver toxicity, have occurred in people taking products containing SARMs." The letter also makes clear that a research use only label did not protect a seller whose marketing pointed at human use, such as muscle growth claims and images of athletes.
  • Sport: According to USADA, "All SARMs are prohibited at all times (both in and out-of-competition) for all athletes," under section S1.2 of the WADA Prohibited List, with ostarine, andarine, LGD-4033 and RAD140 named as examples.

For how rules differ outside the US, see our comparison of international peptide vendor regulations.

Shipping, Returns and Storage Notes

The homepage advertises same or next day shipping in the USA and states that its money-back guarantee "allows for 60 days for exchanges or returns for a full refund." The liquid SARMs page says products "should be stored properly at room temperature and away from direct sunlight to maximize shelf life." That differs from lyophilized peptides, which generally need colder storage; our peptide storage guide covers the peptide side. Shipping thresholds and return terms change, so confirm them at checkout.

Common Questions

Does Sports Technology Labs sell SARMs as capsules?

The SARMs pages list liquids in PEG-400 and 2 gram powders. Capsules are not part of the current SARMs listings.

Are Sports Technology Labs SARMs third-party tested?

The vendor states that every batch is tested by an independent third-party lab using HPLC, and it publishes one current result per SARM. Two of the twelve listed results are below its own 98% minimum, so check the result for your specific product and batch.

Is Sports Technology Labs a SARMs company or a peptide company?

Both. It built its name on SARMs and later added research peptides. Our Sports Technology Labs review covers the peptide catalog, and the Swiss Chems vs Sports Technology Labs comparison sets it against another vendor that sells both categories.

All products discussed are for research purposes only. Not for human consumption.

Disclaimer: All products referenced in this article are intended for laboratory and research use only. They are not intended for human consumption. This article is for informational purposes and does not constitute medical, legal, or professional advice. This site may receive compensation through affiliate partnerships with vendors mentioned.