Peptide Testing Labs in Europe: EU and UK Labs Compared
Education8 min readNovember 16, 2026

Peptide Testing Labs in Europe: EU and UK Labs Compared

Which European labs test research peptides: Janoshik in Prague, FILAB in France, JPT in Berlin, NPL in the UK and university cores, with methods, accreditation, published prices and who can order.

Most peptide testing labs in Europe fall into two groups. Janoshik Analytical in Prague, Czech Republic is the lab the research peptide market uses most, and it takes samples from vendors and buyers worldwide. The other group is contract and institutional labs: FILAB near Dijon in France, JPT Peptide Technologies in Berlin, the National Physical Laboratory (NPL) in Teddington in the UK and university core facilities such as the one at the University of Bern. These offer deeper methods and, in FILAB's case, ISO/IEC 17025 accreditation, but they mostly serve companies and institutes rather than individual buyers. This guide compares what each lab publishes about location, methods, accreditation, prices and who can order.

It is the European companion to our guide to peptide testing labs in the USA. For the background on lab types and what each test measures, see how independent peptide analysis labs work.

Searching for a Peptide Analysis Laboratory in Your Language

Buyers in Europe often search in their own language, and the terms map onto the same services:

  • French: "laboratoire d'analyse des peptides" or "labo expertise peptides" means a peptide analysis laboratory or a lab that runs expert peptide analysis.
  • German: "Peptidanalytik" or "Auftragsanalytik" refers to peptide analysis and contract analysis.
  • Danish and Norwegian: "peptider labtest" means a lab test of peptides.

Whatever the language, you are looking for the same three things: HPLC for purity, mass spectrometry for identity and a report you can verify.

Janoshik Analytical (Prague, Czech Republic)

Janoshik is the European lab most often named on research peptide certificates. The Janoshik listing on Peptide Protocol Wiki gives the location as "Prague, Czech Republic" and lists these tests:

  • HPLC purity
  • LC-MS/MS identity
  • Endotoxin (LAL)
  • Heavy metals (ICP-MS)
  • Sterility (TAMC and TYMC)
  • Residual solvents (GC-MS)

The listing states a standard turnaround of "1-8 days," says the lab "Accepts worldwide samples" and lists, among its drawbacks, "Not ISO 17025 accredited." Reports carry a QR code with "online verification via public.janoshik.com."

A longer public review of Janoshik says the business was "formally registered as Janoshik s.r.o. in Prague, Czech Republic, on October 25, 2022," after around a decade of informal operation. It publishes a price table in US dollars, including:

  • SARM screening: $170
  • Common GLP-1 peptide blind test: $300
  • GC-MS or LC-MS contamination screening: $170
  • Full GLP-1 panel (purity, sterility, endotoxin and heavy metals): about $828
  • Rush processing: "+100% surcharge"

The same review notes that the lab advertises "an average turnaround of 96 hours," that cryptocurrency "is accepted but not required," and several limits: no ISO/IEC 17025 accreditation, little method detail on certificates, and a public database that only shows results the client chose to publish. It also reports that "In February 2026, Janoshik experienced a data breach." The Peptide Catalog testing lab directory lists Janoshik as the only non-US lab among its entries and names it as one of the labs that accepts submissions from individual researchers.

Janoshik also appears in the Finnrick partner network. Its Finnrick lab page lists "Czech Republic" and "HPLC / MS," with 200 published tests, but online ordering through Finnrick for Janoshik showed as unavailable at the time of writing. Finnrick's own sample intake is in Texas and for US shipments only, so a European buyer usually deals with Janoshik directly.

Accredited and Contract Labs in Europe

FILAB (Saint-Apollinaire, near Dijon, France)

FILAB is a French analytical lab whose peptide analysis and characterization page lists HPLC-MS and HPLC-MS/MS on Orbitrap instruments, MALDI-TOF, LC-QTOF-MS and peptide mapping, with amino acid analysis offered as a separate service. The page describes FILAB as "A COFRAC ISO 17025 accredited laboratory" with accreditation number 1-1793.

Two points matter before you contact it. First, accreditation applies to a defined scope, and the page does not say which peptide methods sit inside it, so ask. Second, FILAB is aimed at cosmetics and biopharmaceutical clients and works on quotes, with no published prices. It is the closest European match to what people mean by a "laboratoire d'analyse des peptides," but it is a business lab, not a retail testing service.

JPT Peptide Technologies (Berlin, Germany)

JPT is a peptide company in Berlin that also sells analysis. Its peptide analysis services page lists purity by RP-HPLC with UV detection at 220 nm, molecular weight by mass spectrometry using "ESI and MALDI," sequencing by tandem MS, NMR, solubility testing and quantitative amino acid analysis. It quotes a sample requirement of more than 150 µg and "1-2 days" for purity work, and states that "JPT is certified by an independent certification body (TÜV Rheinland) to ISO 9001:2015 standards." ISO 9001 is a quality management certificate, which is a different thing from ISO/IEC 17025 lab accreditation.

The deciding point for most readers is intake: JPT states, "We do not provide our products and services to private individuals, but only to companies, institutes and universities." Pricing is by quote.

National Physical Laboratory (Teddington, UK)

NPL describes itself as "the UK's National Measurement Institute." Its peptide synthesis and characterisation page lists purity verification by "analytical RP-HPLC and LCMS" on a Thermo Dionex Ultimate 3000 HPLC and a Q-Exactive LC-MS/MS system. The page says NPL works "with companies" and invites an enquiry. It suits reference or method work for organisations, not routine checks on a single vial.

University core facilities

Many European universities run analytical cores that handle peptide work. The protein analytics service at the University of Bern lists amino acid analysis, peptide sequencing by MS/MS and the quality control of synthetic peptides, on Orbitrap and MALDI-TOF instruments. The page does not say whether outside clients are accepted, so contact the facility first. Cores like this are a common route to high-end methods for academic groups.

Lab marketplaces

Testing marketplaces take the order and match it to a lab. Measurlabs in Helsinki, Finland is one. Its HPLC-MS page states, "We are currently only able to serve companies and other organizations," and the page is mostly aimed at food, packaging and chemical testing rather than peptides.

Which European Lab Fits Your Question

Match the lab to the job:

  • "Is this vial what the label says?" Janoshik offers LC-MS/MS identity with HPLC purity and takes individual samples. This is the usual buyer check.
  • "Is it clean enough for cell work?" Janoshik lists endotoxin, heavy metals and sterility panels. Ask a contract lab for the same panels if you need an accredited result.
  • "Will the result stand up to outside review?" FILAB is the ISO/IEC 17025 accredited option among the labs here. Confirm the scope covers your method.
  • "How much peptide is really in the vial?" Ask for amino acid analysis or peptide content. JPT, FILAB and the Bern core list amino acid analysis.
  • "I am an individual, not a company." Janoshik is the clear option. JPT and Measurlabs state they serve organisations only, and NPL and FILAB are built around business clients.

Shipping a Sample Within Europe

Location changes the logistics more than the science:

  • Inside the EU. Parcels between EU member states do not pass through customs, so a sample from France or Germany to Prague moves like any domestic parcel, only further.
  • From the UK or Switzerland. Both sit outside the EU customs union, so a parcel to an EU lab needs a customs declaration and can be held at the border. Describe the contents accurately as a research sample for analysis.
  • Temperature. Lyophilized peptides tolerate transit better than solutions. Send the sealed vial, pack it against crushing and avoid shipping before a weekend. Our storage guide covers what heat does to peptides.
  • Rules differ by country. Check the position on research peptides where you live before shipping. The international regulations comparison sets out the US, EU, UK and Australian frameworks.

Reading a Certificate From a European Lab

Most buyers meet these labs on a vendor certificate rather than through their own order. When a COA names a European lab:

  • Verify the report. For Janoshik, enter the key or scan the QR code at the public database and check that the compound, amount and date match the PDF you were given.
  • Match the batch. The lot on the certificate should match the lot on your vial.
  • Note the methods. A report with HPLC only covers purity. Identity needs mass spectrometry.
  • Compare like with like. Results from labs with different methods will not line up exactly. See how to compare peptide lab records.

For which vendors publish batch certificates openly, see the vendor transparency report. Sports Technology Labs, for example, posts third-party HPLC certificates on a public COA page, so you can read a report before you order.

Common Questions

Is there a peptide testing lab in Europe that accepts individuals?

Yes. Janoshik Analytical in Prague accepts samples from individual buyers as well as vendors, according to the directories cited above. Most accredited and contract labs in Europe only take orders from companies, institutes or universities.

Is Janoshik accredited?

No. Public listings state that Janoshik does not hold ISO/IEC 17025 accreditation. Its reports can be checked against its public database, which is a separate kind of assurance.

Which European peptide lab is ISO 17025 accredited?

Among the labs covered here, FILAB in France states COFRAC ISO 17025 accreditation (number 1-1793). Ask which peptide methods fall within its scope before ordering.

Is a European lab better than a US lab?

Not by location alone. Methods, accreditation, intake rules, price and turnaround are what separate labs. A European lab mainly saves European buyers an international shipment, the same way a US lab does for US buyers.

All products discussed are for research purposes only. Not for human consumption.

Disclaimer: All products referenced in this article are intended for laboratory and research use only. They are not intended for human consumption. This article is for informational purposes and does not constitute medical, legal, or professional advice. This site may receive compensation through affiliate partnerships with vendors mentioned.